![]() ![]() Setting rtpmode to 0 instead, will make sure single NAL are used instead. This can be changed to fragmentation units, by setting: Default RTP packetization mode is single NAL unit packets.The encoder by default sends an H.264 i-frame every 60 seconds.You can also change the resolution by adding the parameter: r esolution=x. We support the following resolutions:Īs an example, to stream CIF at 512 kbps from an Orbit X with IP 192.168.43.3, open:.If you are in doubt about the network quality, then we suggest lowering it. If you skip the bitrate parameter, then the default bitrate is 2000 kbps. To change bitrate, add bitrate= in this way: You can add several parameters for adjusting the video stream.To start a stream in VLC, connect to the Orbit X IP address, and open a network stream with the parameters:.This is because the device can only stream to one device, and if it is trying to stream to the app, it will reject requests from VLC. To start a stream from the Orbit X to VLC, you first need to make sure it is not connected to the Orbit X app. ![]() Note that Adobe's proprietary RTMP protocol is very similar to RTSP and, in fact, shares most of. You may also want to note the IP address of the Orbit X, as this is needed for opening a stream in VLC. Available open-source RTSP servers are VLC, Flumotion. Check the Orbit X server, and make sure the "Always on RTSP server" is checked. Some RTMP ingest servers requires authentication. Solution home Orbit X Camera Daily Use Streaming to VLC media playerīefore using VLC, you should check the configuration in the Orbit X app. In order to set a custom RTMP destination you will need the RTMP Server URL and the RTMP Stream Key.Click the Custom RTMP icon and set Server URL and Stream Key. ![]()
0 Comments
Leave a Reply. |
AuthorWrite something about yourself. No need to be fancy, just an overview. ArchivesCategories |